Continuous ink supply system (CISS) for Brother MFC-J430w
Total amount — 45.90 USD
Warranty 12 months
Country of origin:
Material of CISS:
the same as original
1 CISS 45.90 USD = 56 original cartridges 840 USD
Ink system for brother MFC-J430W: low cost of printing – great opportunities
How does ciss brother MFC-J430W work?
The use of permanent ink ciss MFC-J430W allows to increase significantly printing performance and reduce expenses, considerably reduce the cost of color printing and increase the total quality of the printed pages. With standard use, the printer counts the number of pages printed and the number of technical clearings – which are necessary for its long-term normal operation without failure.
Technical cleaning is usually made by the printer itself following the software installed in it, as well as cleaning, which the user makes periodically. When you have acquired the necessary amount of data, the printer stops working until hardware resets. During discharge of wasted ink into a separate container, such a counter can be reset manually if "a certain skill" is present and you may continue using the printer with cis brother MFC-J430W.
Continuous ink supply system – what is unique?
CISS (ciss ink system brother MFC-J430W) – is a system of continuous ink supply from the outer container to the print head of the inkjet device. The system CISS for MFC-J430W – works on the principle of communicating vessels, which are divided into the donor vessels and acceptor vessels (the print head unit), they are connected by a special elastic loop, which transports the ink as they spent during the process of printing. The unique design of the receiving capsule ciss for brother MFC-J430W, as well as in similar models ciss for brother DCP-J525W and ciss for brother MFC-J625DW perfectly removes excessive air out of the system of communicating vessels and prevents any flow of ink from one container to another.
To compensate the underpressure created in a capsule during the printing process, the ink flows through the tubes of the donor containers to the cartridge instead of the ink used. Due to this system, a constant supply of ink to the print head and its constant presence in it are provided. The donor containers can be as of small volume (in the range of 100-150 ml) and of quite significant one (in the range of 200-500 ml), which are up to 50 times larger than the original cartridges. This can allow to change dramatically the type of supplies, to use the ink of any other manufacturers, selecting the optimum combination of product quality and their prices. As a result you will get a huge financial difference and consequently − economical savings.